Brewer Element Treatment 2130/2140 - Manual (Page 7)

Document 101292 RevA Printed in USA © 2010 7
MODELS 2130 and 2140 STEP 5
STEP A: Align holes in Hinge with holes in frame. Hinge must be oriented as shown with Hinge mounting
flange facing the Head End of the table.
STEP B: Install 4 Screws G (1/4”-20 x 1/2”) into the Hinge and through the frame. Fasten with 4 Nuts N
(1/4”-20) and tighten.
Screw G
Nut H
Head End
Detail of Hinge
Assembly