STEINEL HFLUM2-WR - Manual (Page 5)

Wiring
5
There are three terminals for streamlined
wiring.
Use only solid (16-20) AWG CU wire.
Strip insulation (9-10mm/0.37 inch)
Operation
The HFLUM2-WR operates by turning
lights on automatically when occupancy
is detected and off when the space is left
vacant and the time delay has elapsed.
Light level function
The light level feature keeps lighting
off during daylight hours, regardless of
occupancy.
Surge protection
Every sensor contains built in surge
protection. This feature will reset the
unit automatically after: power surges,
power outages, and power shortages.
Surge protection protects the sensor if it
is miswired as well. If miswired, shut off
power, correct the wiring, and the sensor
will then operate correctly.
www.steinel.net (800) 852-4343
LOAD
NEUTRAL
HOT
= Neutral
= Hot
= Load