Ag Leader GPS 2500 RTK Radio Installation Instructions - Manual (Page 2)

2202 South Riverside Drive, Ames, IA 50010
Phone: 515-232-5363 Fax: 232-3595 Internet: http://www.agleader.com
p/n: 2006342 Rev A
2
3.
Hand tighten the RF coax cable from the
receiver onto the radio RF connector. Do not
over tighten. The cable should end up at
roughly a 30 degree angle to the radio board.
4. Attach the 10-pin connector with the clasp
facing inward, as shown in the picture.
Ensure it snaps into place.