Ag Leader GPS 2500 RTK Radio Installation Instructions - Manual (Page 3)

2202 South Riverside Drive, Ames, IA 50010
Phone: 515-232-5363 Fax: 232-3595 Internet: http://www.agleader.com
p/n: 2006342 Rev A
3
5.
With the RF coax cable at the correct angle, it
will fit into the access hole as shown.
6.
Using the screws provided in the radio kit,
secure the radio assembly into the radio bay.
Verify the o-ring is installed in the groove,
before re-installing the radio bay cover.
7. The cover should be tightened evenly as to
not distort the o-ring. Ending torque should
be 5 in/lbs.
8.
Install the RTK antenna mount using the
screws provided in the radio kit.