Ag Leader GPS 2500 Firmware Update Instructions - Manual (Page 6)

4/21/14 Rev
D
6
Cabling:

Port A will connect to the Display Cabling to power and communicate with the GPS 2500

From the Intuicom Bridge, connect the P2 Data connection to an Ag Leader Null Modem cable (p/n:
2000819), then to Port B on the GPS 2500 cable.

The Intuicom Bridge will need to be powered with the supplied cabling.

Supported NTRIP Streams are:
• CMR+
• RTCM 3.1

IMPORTANT: Power the Intuicom RTK Bridge before the GPS 2500. Once the TX light is blinking on the
Intuicom, power the GPS 2500. If the GPS 2500 is powered first, it may not recognize the data from the
Intuicom Bridge.