Ag Leader EZ-Guide 250 All Port Cable Installation - Manual (Page 2)

2202 South Riverside Drive, P.O. Box 2348, Ames, IA 50010
Phone: 515-232-5363 Fax: 232-3595 Internet: http://www.agleader.com
Part No. 2005928 Rev A
2
Figure 2 shows the Implement Switch Adaptor (p/n 4001514) being used with the EZ-Guide 250 all port cable p/n 4001442 (TNL p/n 64045) and radar output
adaptor cable p/n 4001445, 4001446, 4001447 (TNL p/n 64272, 64273, 64274). The Implement Switch adaptor cable will plug into the Radar/Switch 3-pin Deutsch
connection on the radar cable.
The Ag Leader Implement Switch can be connected to the Implement Switch adaptor with any extension cables (p/n 2000453-x) that may be needed.
If an extension is needed for the NMEA output connection to an Ag Leader monitor p/n: 4001541-6 can be used. A Null Modem cable (p/n 2000819) is required for all
Ag Leader monitors. For connecting to a computer, the Null Modem cable (p/n 2000819) is not required.
Figure 2