Ag Leader EZ-Guide 500 Auxiliary Cable Installation User Manual
Ag Leader Equipment
Advertising
2202 South Riverside Drive, P.O. Box 2348, Ames, IA 50010
Phone: 515-232-5363 Fax: 232-3595 Internet: http://www.agleader.com
Part No. 2005948 Rev A
1 of 4
Installation Instructions: Auxiliary Cable – EZ-Guide 500
This document describes how to connect an external device to receive NMEA messages from the Auxiliary port
on the EZ-Guide 500.
1. Locate cable 4001968 (TNL 62609).
2. Remove the 12-pin DUETSCH dust cap from the P2 (gray) connection on cable p/n 4001968 (TNL 62609).
3. Hold connector with rear grommet facing you and remove the plastic inserts from cavity’s 5, 6, and 7.
Advertising