Ag Leader EZ-Guide 500 Auxiliary Cable Installation - Manual (Page 3)

2202 South Riverside Drive, P.O. Box 2348, Ames, IA 50010
Phone: 515-232-5363 Fax: 232-3595 Internet: http://www.agleader.com
Part No. 2005948 Rev A
3 of 4
9. Push contact straight into connector grommet until a click is felt. A slight tug will confirm that contact is properly locked
in place.
10. Once all contacts are in place, reinsert the orange wedgelock. The wedgelock will snap into place.
11. Insert the modified connector into the P2 connection of cable p/n 4001968 (TNL 62609).
12. Connection the P1 connection of cable p/n 4001968 (TNL 62609) to the 19-pin round AUX connector on the back of
the EZ-Guide 500
13. Connect the external device to the 9-pin serial connector on cable p/n 4001444 (TNL 63076)
NOTE: The P3 (Green DUETSCH) and the USB connections are not used at this time.