Ag Leader SMS Mobile Operating Modes Quick Start Guide User Manual
Page 21
SMS Mobile Operating Modes
Revision 8/1/2013 © 2013 Ag Leader Technology, Inc All Rights Reserved
20
6.
You will now be prompted with the default attributes that are currently available and
the current default values for each. All logged points that are created will get these
attributes and their values. These values can be edited now before you continue. You
can NOT add attributes from here. Attributes can only be added from the Operations
setup. Press OK to continue.
7.
Now you will be prompted with an option to map related datasets. Related datasets are
other load/regions that are related to the new dataset you are creating or an existing
dataset you have selected to add to. An example would be that you have logged
multiple days of coverage data in the same field and you have multiple datasets with
different products. Selecting the option to map all related datasets will show the other
datasets on your map plus the new data you are logging. The other benefit is that this
does not use up an additional map layer slot. Press OK to continue.
8.
The last step before entering the operating mode, which is only available if you have
a set field boundary, is the settings for the Virtual Implement Switch (VIS). Select
whether you want to Enable or Disable the VIS and how you want it to handle holes
inside your field boundary. Click OK to continue.
9.
You will now enter the Coverage Logging mode editor. To begin logging coverage
data, select Log Coverage from the Main Menu or from the Map Toolbar.
10.
To begin logging data you now select the Start button in the right corner of the map,
press the Enter key on your mobile devices keypad, or press the Action Menu and
select Start. Once selected, the Start icon and selections will change to Pause.
11.
To stop logging select Cancel. Save does not need to be selected in this mode
because data is automatically saved as it is logged.
NOTE:
Coverage data cannot be edited or undone once logged. To remove data you
must go to Dataset Maintenance and delete the entire dataset or edit it in the
desktop software.