Atmel Evaluation Board AT91SAM9XE-EK - Manual (Page 4)

AT91SAM9XE-EK Evaluation Board User Guide 1-1
6311A–ATARM–04-Feb-08
Section 1
Overview
1.1 Scope
The AT91SAM9XE-EK evaluation kit enables the evaluation of and code development for applications
running on an AT91SAM9XE device.
This guide focuses on the AT91SAM9XE-EK board as an evaluation platform.
The board supports the AT91SAM9XE in an LFBGA217 package as well as in a PQFP208 package.
1.2 Deliverables
The AT91SAM9XE-EK package contains the following items:
„ an AT91SAM9XE-EK board
„ universal input AC/DC power supply with US, UK and Europe plug adapter
„ one A/B-type USB cable
„ one serial RS232 cable
„ one RJ45 crossed Ethernet cable
„ one CD-ROM that allows the user to begin evaluating the AT91 ARM® Thumb® 32-bit microcontroller
quickly.
1.3 AT91SAM9XE-EK Evaluation Board
The board is equipped with an AT91SAM9XE (217-ball LFBGA package) together with the following:
„ 64 Mbytes of SDRAM memory
„ 256 Mbytes of NANDFlash memory
„ one Atmel serial DataFlash ®
„ one Atmel TWI serial EEPROM
„ one USB device port interface
„ two USB Host port interfaces
„ one DBGU serial communication port
„ one complete MODEM serial communication port
„ one additional serial communication port with RTS/CTS handshake control
„ JTAG/ICE debug interface
„ one PHY Ethernet 100-base TX with three status LEDs
„ one Atmel AT73C213 Audio DAC
„ one Power LED and one general-purpose LED