AirSep MN187-1 - Manual (Page 8)

MN187-1 Rev -
Page 8 of 8
Fig. 17
7. Pressing the “Clear “ button will clear the compressor run time. A warning box
will appear asking if you are sure you want to clear the compressor time. If this is
what you want to do click “Yes”, if not click “No”.
8. Figure 18 shows the Focus Data Interface program screen after pressing “Yes” to
clear compressor time.
Fig. 18
9. To exit program, click “Exit” button
PDF created with pdfFactory Pro trial version www.pdffactory.com