American Fibertek SM10p-PoE - Manual (Page 27)

Commands Level
Access
Modes
Method
Begin a
User
session with
EXEC
your switch.
Enter the
Privileged enable
EXEC command
while in user
CLI command interface
Exit
Prompt
Method
Enter
switch> logout or
quit.
Enter
switch# disable to
exit.
20
About This Mode1
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system
information.
The privileged
command is in
advanced mode
Privileged this mode