American Fibertek SM10p-PoE - Manual (Page 77)

Rate Limiting interface
¢ All the ports support port ingress and egress rate control. For example, assume port
1 is 10Mbps, users can set it’s effective egress rate as 1Mbps, ingress rate as
500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate
‹ Ingress: Enter the port effective ingress rate (The default value is ‘0’)
‹ Egress: Enter the port effective egress rate (The default value is ‘0’)
¢ And then, click Apply to apply the settings
VLAN configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain,
which would allow you to isolate network traffic, so only the members of the same VLAN
will receive traffic from each other. Basically, creating a VLAN from a switch is logically
equivalent of reconnecting a group of network devices to another Layer 2 switch.
70