BMR Suspension BK027 - Manual (Page 2)

Delrin Rear Subframe Bushings
BK027 (Continued)
6. Un-plug the fuel pump wiring harness located
on the passenger side of the car next to the
front cradle bushing. See Image 4.
7. Twist the rubber brake line while pulling up
to “release” it from the bracket attached to the
upper control arm on each side. Image 5
below.
8. Using an 18mm socket or wrench, remove the
(2) bolts that hold the caliper to the spindle
(Image 6). Remove the caliper and tie it up
out of the way with a zip tie.
Continued