ADTRAN L768 User Manual
Page 43
Chapter 3: Terminal Menu Operation and Structure
61202192L1-1
Express L768/L1.5 User Manual
27
whose destination address is not found in the route table. If this address is all
zeros, then the first WAN connection becomes the default gateway.
IP/Static Routes
Static Routes can be inserted under this menu.
Static Routes/Active
Write security: 4; Read security: 5
Adds this static route entry to the IP routing table when set to Yes (def) and
removes it (if it was previously added) if set to No.
Static Routes/IP Address
Write security: 4; Read security: 5
This is the IP address of the host or network address of the device being routed
to.
Static Routes/Subnet Mask
Write security: 4; Read security: 5
This mask determines the bits in the previous IP address that are used. If this
is to be a host route, it must be set to all ones (255.255.255.255).
Static Routes/Gateway
Write security: 4; Read security: 5
This is the IP address of the router to receive the forwarded IP packet.
Static Routes/Hops
Write security: 4; Read security: 5
This is the number of router hops required to get to the network or host. Max-
imum distance is 15 hops.
Static Routes/Private
Write security: 4; Read security: 5
When set to No, the Express L768/L1.5 will advertise this static route using
RIP. Otherwise, setting to Yes means that the route is kept private.