BMR Suspension BK004 User Manual
Page 2
2
Rear Outer Control Arm Bushings
BK004 (Continued)
7. Using a bushing removal tool, press the OE bushing out of the spindle.
8. Insert the BMR polyurethane bushing halves.
9. Lube the inside of the BMR bushings then install the center sleeve.
10. Lift the control arm back into place and insert the bolt.
11. Torque to 85 ft/lbs.
12. Insert the shock bolt and torque to 85 ft/lbs.
13. Re-connect the sway bar end-link and tighten
14. Mount the trailing arm and insert the mounting bolt. Tighten to 85 ft/lbs.
15. Mount wheels and lower vehicle.
WWW.BMRFABRICATION.COM
This product is an aftermarket accessory and not designed by the vehicles manufacturer for use on this vehicle. As
such, buyer assumes all risk of any damage caused to the vehicle/person during installation or use of this product.