Boonton 4530 Peak Power Meter User Manual User Manual
4530 series rf power meter instruction manual
Advertising
4530 SERIES
RF POWER METER
INSTRUCTION MANUAL
This manual is applicable to: Revision date:
07/08/2003
to: Revision date: 0
7
/
0
8/2003
Manual P/N: 98404800C
ersions: 20021119 and later* CD P/N: 98404899C
Instrument serial numbers: ALL*
Manual P/N: 98404800C
Operating Firmware Versions: 20021119 and later*
CD P/N: 98404899C
*earlier firmware may not contain all capabilities listed herein
BOONTON ELECTRONICS
Web Site: www.boonton.com
A subsidiary of Noise/Com -- A Wireless Telecom Group Company
Email: [email protected]
25 Eastmans Road
Telephone: 973-386-9696
Parsippany, NJ 07054-0465
Fax: 973-386-9191
%
Advertising
Table of contents
Document Outline
- Boonton 4530 Series
- Contents
- 1. GENERAL INFORMATION
- 2. INSTALLATION
- 3. OPERATION
- 3.1 OPERATING CONTROLS, INDICATORS AND CONNECTIONS
- 3.2 KEY FUNCTION SUMMARY
- 3.3 DISPLAY FUNCTIONS
- 3.4 OPERATING MODE SUMMARY
- 3.5 MENU MODE OPERATION
- 3.6 TEXT MODE OPERATION
- 3.7 GRAPH MODE OPERATION
- 3.8 EDIT MODE OPERATION
- 3.9 DISPLAY FORMATS
- 3.10 SENSOR CONNECTION AND CALIBRATION
- 3.11 MENU REFERENCE
- 3.12 ERROR MESSAGES AND STATUS CODES
- 3.13 RECORDER OUTPUT CALIBRATION
- 3.14 FIRMWARE UPDATE
- 4. REMOTE OPERATION
- 4.1 GPIB CONFIGURATION.
- 4.2 SERIAL PORT OPERATION.
- 4.3 SCPI LANGUAGE SYNTAX.
- 4.4 BASIC MEASUREMENT OPERATION.
- 4.5 COMMAND REFERENCE.
- 4.5.1 MEASure Queries
- 4.5.2 INITiate and ABORt Commands
- 4.5.3 FETCh Queries
- 4.5.4 READ Queries
- 4.5.5 Native Mode Commands
- 4.5.6 SENSE Subsystem
- 4.5.7 CALCulate Subsystem
- 4.5.8 MARKer Subsystem
- 4.5.9 DISPlay Subsystem
- 4.5.10 TRIGger Subsystem
- 4.5.11 TRACe Data Array Commands
- 4.5.12 SENSe:MBUF Data Array Commands
- 4.5.13 SENSe:SBUF Data Array Commands
- 4.5.14 SENSe:HIST and SENSe:CALTAB Data Array Commands
- 4.5.15 CALibration Subsystem
- 4.5.16 MEMory Subsystem
- 4.5.17 OUTPut Subsystem
- 4.5.18 SYSTem Subsystem
- 4.5.19 STATus Commands
- 4.5.20 IEEE-488.2 Commands
- 4.5.21 Remote Interface Command Summary
- 4.6 REMOTE SENSOR CALIBRATION
- 4.7 NATIVE MODE PROGRAMMING.
- 4.8 SCPI EXAMPLE PROGRAM FRAGMENTS.
- 4.9 ERROR AND STATUS CODES.
- 5. MAKING MEASUREMENTS
- Appendix A Sensors
- Appendix B Model 2530 1GHz Calibrator