Boonton 52000 Series USB CW Power Sensor User Manual
Page 16
1
USB Installation
The USB driver that is installed is a generic USB sensor driver and it
is used for a range of USB sensors. The sensor driver installed on your
PC is called FTDI FT8U2XX Device.
Driver installation with Windows® XP SP1
Figure 10 Continue Anyway with installation
8. The driver will now be installed.
9. Select Finish when the driver installation is complete. Windows
will now confirm it has identified the USB sensor hardware.
This section describes how to install and configure your USB drivers
on a PC with Windows® XP and service pack 1 (SP1) operating
system.
Caution Disconnect any LAN connections to the PC. Windows® XP
SP1 does not provide flexible USB driver installation. The operating
system first attempts to obtain the USB driver from an external
source. This external driver does not provide a working connection
with your sensor.