Clinton Electronics CE-RP1 - Manual (Page 12)

l
Initiation
1. To turn the device ON / OFF:
• Press and hold the power button for at least 5 seconds.
2. The default menu language is English. To change the languages:
• Select item [POWER ON SETUP] in the main menu. Here you can change
the language of the menu.
3. After successful start-up the recorder shows the live view.
• If schedule recording has been programmed the recorder will automatically
continue this schedule.
• During recording the REC LED indicator is solid green “ON”.
4. If the symbol [ ] is shown, the SD-Card has been recognized correctly and
the recorder is ready.
• If the SD-Card cannot be recognized the REC LED flashes red. In this case,
format the SD-Card.
5. If the write-protection of the SD-Card is activated, it is only possible to read
recorded data.
Attention
- Never remove the SD-Card during the boot process. This can lead to
permanent damage of recorded data.
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
9