Clinton Electronics CE-RP1 - Manual (Page 26)

Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Troubleshooting
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact Clinton Electronics
Technical Support at 1-800-549-6393 or 815-633-1444.
Problem Solution
Why is the power button not
functioning?
The battery power is empty, battery needs •
to be recharged.
Press the power button for 5 seconds to •
power-on the device. After 2-3 seconds
of initialization, the image will be displayed.
Why does it auto power-off
when using external power
to power-on?
It is because the battery is in a state of •
completely releasing power. To enable
normal power-on, recharge the power
device for 20-30 sec. before power-on.
Why does the system auto
reboot during normal
operation?
It indicates that an SD Card error has been •
detected. To enable data completeness,
monitoring procedure will reboot the
device. After device reboot the system
returns to the status before reboot (ie.
returns to Manual Record or Schedule
Record).
23