Eddie Motorsports MS149-15 55-57 - Manual (Page 2)

6. With the struts facing the center of the car, slide the hinge into the pocket strut first. Push
ball stud through the 5/16” hole, and secure with a washer and nut. Install the new hinge
pins and bend the tab back down.
7. Reinstall and align the trunk lid using your new hardware.
EDDIE MOTORSPORTS IS NOT RESPONSIBLE FOR CUSTOMER APPLICATIONS
THAT ARE OUTSIDE THE NORMAL INTENDED USE OF OUR PRODUCTS,
INCLUDING SPECIFIC MODEL AND YEAR APPLICATIONS
PLEASE CONTACT US WITH ANY QUESTIONS @ 888-813-1293
WWW.EDDIEMOTORSPORTS.COM