EOTech X320 User Manual - Manual (Page 17)

function for a long push is to cycle through white/black hot
and colorized video modes.
⇒ Extended Long Push (Factory Defined) – Press and hold User
Control Switch for period longer than 5 seconds.
Extended Long Push resets the camera to factory defaults
This may be desireable if the user wishes to undo any changes
that were made using the GUI and return the camera to
original out of the box configuration.
The user defineable functions are: electronic zoom,
white/black hot mode, manual touchup, Hot Target Level I
and II, custom color. Definitions of these functions a
defined in Section 3 of this manual.
Focusing for Close-up Operation
The
X320 has overall
viewing range from 15ft to
infinity. In the Far Focus
position, objects from 15ft to
infinity will be in focus. By
rotating the Lens, objects as
close as 4ft can be brought
into focus.
The Lens may feel difficult to turn. This is normal, and is due to
the tight seal required to make the camera waterproof.
FAR
Focus
NEAR
Focus
17
function for a long push is to cycle through white/black hot
Press and hold User
Control Switch for period longer than 5 seconds. *An
camera to factory defaults.
This may be desireable if the user wishes to undo any changes
and return the camera to
electronic zoom,
ode, manual touchup, Hot Target Level I
Definitions of these functions are
al, and is due to
the tight seal required to make the camera waterproof.