EOTech X320 User Manual - Manual (Page 22)

22
1.00× is always selected and is the default
power up setting. Factory defaults select
1.00× and 2.00× and pressing the User
Control Switch cycles between these two
settings.
Colorization Sequence sets the X320 to toggle through the
selections made in the Colorization Sequence zone
White Hot means that cold objects in the scene appear black and
hot objects appear white with all objects between being shades
of gray
. Black Hot reverses the setting so that hot objects
appear black and cool objects appear white .
Hot Target Level (I & II) assign color to the hottest 1% (Level I)
or 10% (Level II) of the objects in the scene.
The color assigned can be selected
from Hot Target Level Color zone by
clicking on the colored box.