EOTech XPS3 User Manual
Page 20
2.1.3
Replacing the Battery
Remove the battery cap by turning the cap counterclockwise until the cap pulls away from the
battery compartment (Fig. 3). After the battery cap is removed, slide the battery out and replace
it with a fresh one. A
“+”
marking can be found on the top of the battery cap ensuring correct
battery orientation. To reinstall the battery cap, align the cap with the battery compartment and
carefully begin to thread the cap, turning it clockwise. Before you begin tightening the cap,
make sure the threads are aligned correctly to avoid cross threading. Verify correct battery
installation immediately by turning on the sight and checking if the holographic reticle
appears.
The tether can be tucked in between the battery cap and the hood to minimize the risk of snagging.
12