Asus M2A690G - Manual (Page 39)

2-21 ASUS V-Series M2A690G
2.11 Re-connecting cables
You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.
LED cables
Connect the reset button, power switch, power LED, and HDD LED
cables to their respective leads in the system panel connector on the
motherboard.
HDD LED
Power LED
Power Switch
Reset button
R
System Panel Connector
PANEL
PLED- +5V Speaker
SPEAKER
PLED
Ground
Reset
Reset
Ground Ground PLED+
IDE_LED- IDE_LED+
IDE_LED
PWR
Ground
PWRSW
M2A-VM