5 onboard device configuration, Pci latenct timer (clk) [64, Maximum payload size [4096 – Asus M2A690G User Manual

Page 92: Irq resources

Advertising
background image

5-23

ASUS V-Series M2A690G

PCI Latenct Timer (CLK) [64]

Use <+> and <-> to adjust the value. The value ranges from 0 to 255.

Maximum Payload Size [4096]

Sets maximum TLP payload size for the PCI Express devices. The unit is

byte. Configuration options: [128] [256] [512] [1024] [2048] [4096]

F1:Help ↑↓ : Select Item

-/+: Change Value

F5: Setup Defaults

ESC: Exit →←: Select Menu

Enter: Select SubMenu

F10: Save and Exit

Select Menu

Item Specific Help

Onboard Device Configuration

South OnChip IDE Device

South OnChip PCI Device

Front Panel Type

[HD Audio]

Primary Display Adapter

[PCIEx]

Onboard LAN

[Enabled]

Onboard LAN Boot ROM

[Disabled]

Serial Port1 Address

[3F8/IRQ4]

Parallel Port Address

[378/IRQ7]

Parallel Port Mode

[EPP]

x ECP Mode Use DMA

3

Phoenix-Award BIOS CMOS Setup Utility

Advanced

5.4.5 Onboard Device Configuration

IRQ Resources

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP

devices. When set to [Reserved], the IRQ is reserved for legacy ISA

devices. Configuration options: [PCI Device] [Reserved]

IRQ Resources

This sub-menu is activated only when the Resources Controlled By item is

set to [Manual].

Select Menu

Item Specific Help

Legacy ISA for devices

compliant with the

original PC AT bus

specification, PCI/ISA PnP

for devices compliant with

IRQ Resources

IRQ-3 assigned to

[PCI Device]

IRQ-4 assigned to

[PCI Device]

IRQ-5 assigned to

[PCI Device]

IRQ-7 assigned to

[PCI Device]

IRQ-10 assigned to

[PCI Device]

IRQ-11 assigned to

[PCI Device]

IRQ-14 assigned to

[PCI Device]

IRQ-15 assigned to

[PCI Device]

Phoenix-Award BIOS CMOS Setup Utility

Advanced

Advertising
This manual is related to the following products: