American Dynamics VideoEdge ADNSNVR-CL1 User Manual

Page 19

Advertising
background image

Architect & Engineer Specification

8200-2608-01 B0

VideoEdge

®

Network Video Recorder

19 of 20

AMERICAN DYNAMICS

VIDEOEDGE

TM

NETWORK VIDEO RECORDER

SABS (South Africa) Class B

CCC (China) Class B

MIC (Korea) Class B

Safety ............................................... UL 60950

CAN/CSA C22.2 No. 60950

EN 60950

IEC 60950

PART 3 – EXECUTION

3.01 EXAMINATION

A. Submission of a proposal confirms that the contract documents and site conditions

are accepted without qualifications unless exceptions are specifically noted.

B. The site shall be visited on a regular basis to appraise ongoing progress of other

trades and contractors, make allowances for all ongoing work, and coordinate the
requirements of this contract in a timely manner.

C. The Network Video Recorder must be inspected before installation, and shall be free

of any cosmetic defects or damage.

3.02 PREPARATION

A. Prior to installation, the Network Video Recorder shall be configured and tested in

accordance with the manufacturer’s instructions.

3.03 INSTALLATION

A. The Network Video Recorder must be installed, programmed, and tested in

accordance with the manufacturer’s instructions.

1. In order to ensure a complete, functional Network Video Recorder, for bidding

purposes, where information is not available from the Owner upon request, the
worst-case condition shall be assumed.

2. Interfaces shall be coordinated with the Owner’s representative, where

appropriate.

3. All necessary backboxes, racks, connectors, supports, conduit, cable, and wire

must be furnished and installed to provide a complete and reliable Network
Video Recorder installation. Exact location of all boxes, conduit, and wiring runs
shall be presented to the Owner for approval in advance of any installation.

4. All conduit, cable, and wire shall be installed parallel and square with building

lines, including raised floor areas. Conduit fill shall not exceed forty percent
(40%). All wires shall be gathered and tied up to create an orderly installation.

Advertising