American Dynamics VideoEdge ADNSNVR-CL1 - Manual (Page 7)

Architect & Engineer Specification
8200-2608-01 B0 VideoEdge ® Network Video Recorder 7 of 20
AMERICAN DYNAMICS
VIDEOEDGE TM NETWORK VIDEO RECORDER
disk storage devices that are utilized by the server for network connectivity
and storing video data. The latest list of supported devices must be available
on the manufacturer’s web site.
10. The Network Video Recorder software shall include support for Motion
JPEG (MJPEG), MPEG-4, and a patented proprietary compression scheme
called Active Content Compression (ACC) that differentiates motion from
video noises. The latest list of supported codec’s must be available on the
manufacturer’s web site.
11. The Network Video Recorder software shall provide picture-in-picture (PiP)
support to enable digital pan-tilt-zoom control for all fixed cameras. The
client management software shall allow these digital preset positions to be
saved onto the local client machine.
12. The Network Video Recorder shall incorporate open and innovative design
architecture.
13. The Network Video Recorder’s operating system and application must be
installed on a dedicated hard drive, separate from the hard drives used for
video recording, to dramatically reduce the risk of system failure.
14. The Network Video Recorder software shall utilize minimum number of
open ports for discovery and communication to reduce the risk of attack from
malicious programs and system hackers.
15. The Network Video Recorder software shall easily integrate with other
business-critical systems and third party applications using its 100%
Application Programmers Interface (API) driven interface. The manufacturer
of the unit shall also offer a Software Developers Kit (SDK) to select third
party manufacturers, in addition to sample modular programs with their
source codes in C#, allowing programmers to develop their own software to
control the unit’s functions.
16. The Network Video Recorder software shall utilize standard server-client
architecture for access and management of the server and its resources.
17. The Network Video Recorder software shall provide virtualization so that
any number of Network Video Recorder servers and cameras from one or
more sites can be managed as a single logical Network Video Recorder using
the client management software.
18. The Network Video Recorder software shall support automatic and seamless
bridging of multiple networks. This will enable the utilization of one
physical/logical network segment for all users to access the Network Video
Recorder while a separate physical/logical private network segment can be
used for IP cameras and encoders. The software shall automatically bridge
multiple networks to enable both IT and security managers to collectively
integrate the server into existing networks without compromising security