Penske Racing Shocks 8300-DA - Manual (Page 5)

PS-8300RM/PB · DOUBLE ADJUSTABLE 2013/2014
5
F
o
rc
e
(
lb
s)
25.0
50.0
75.0
100.0
125.0
150.0
175.0
200.0
225.0
250.0
275.0
300.0
325.0
350.0
375.0
400.0
425.0
450.0
475.0
7.11
495.98
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
0.00 9.95
Velocity (in/sec)
116201_ST1300
8983.mcr - FULL
SOFT - 10.00
in/sec
FULL HARD - 10.00
in/sec
MID SETTINGS -
10.00 in/sec
Getting Started:
The 8300 series shocks come set from the factory at a pre set adjuster setting ready to bolt on your
vehicle. They dyno graph supplied will show you full adjustment range and where they are currently set.
We will typically try and set the shocks at a mid setting so you can adjust them either stiffer or softer
depending on your feel.
Adjusters:
Compression Adjuster- This is the knob that is located on the remote or piggy back canister. This will
generally have 40 clicks of compression. If instead of a knob, you have a ½” hex head, you will have 20
clicks of compression adjustment. On your dyno sheet, you should see about 175lbs-200lbs of total
compression adjustment. On both adjuster types, clockwise is stiffer, counter clockwise is softer.
Knob adjuster side entry/ 40 clicks Hex adjuster top entry / 20 clicks of adjustment