Penske Racing Shocks 8300-DA - Manual (Page 7)

PS-8300RM/PB · DOUBLE ADJUSTABLE 2013/2014
7
To Set Adjusters:
All or our adjusters work similar, in that “clockwise” is stiffer or more damping, “counter clockwise” is
softer or less damping.
When you receive a dyno sheet, it will display your damping curve in full stiff, full soft, and shipped
settings. You will notice the (-) before the setting; this identifies how many clicks off of full hard the
adjuster was set to achieve this curve. Typically the graph will have a “C” for compression and “R” for
rebound before the setting. If it doesn’t as an industry standard, compression is always referred to first,
followed by rebound. So to set to specific setting, you would first wind adjuster to full hard, then count
the number of clicks off of full hard until the desired setting is reached.
F
o
rc
e
(
lb
s)
-700
-600
-500
-400
-300
-200
-100
0
100
200
300
400
-709.2
518.1
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
0.00 9.86
Velocity (in/sec)
LF comp -6, Reb
-20.pvp
Front comp -0, Reb
-0.pvp
Front comp -17,
Reb -45.pvp