Penske Racing Shocks 8975-STREET - Manual (Page 10)

PS‐8975‐STREET (Double Adjustable) 2013/2014
10
To adjust, follow the procedure as follows (if this procedure is not followed in the recommended
sequence, the intended settings may not be achieved in practice):
To Set Adjusters:
1.) Turn knob or screw or sweep adjuster clockwise to full stiff.
2.) Turn adjuster back “counter clockwise” to desired settings. Typically this is shown as a negative
(‐) settings. Example: Compression ‐5 clicks, Rebound ‐10 clicks/sweeps.
3.) During discussions on handling, if you were to be instructed to “soften rebound by 5 clicks” it
would mean to adjust your rebound counterclockwise by 5 clicks or sweeps, depending on your
adjuster.
Clockwise = Stiffer