Powerwinch Deck Mate 25 - Manual (Page 4)

4
STEP 1. Assembling, locating and installing the bow roller. (Continuted)
Operating Instructions and Replacement Parts List Deckmate 25 Free Fall Pontoon Windlass
P55710 ROLLER
P55712 BOW ROLLER SPACER
INSERT SPACER
INTO HOLE IN
BOW ROLLER AS
SHOWN
FIGURE 1. ASSEMBLING SPACER INTO ROLLER
P55715 BOW
ROLLER LOOP
ROLLER AND
SPACER P55703
ROLLER
BOLT
ST070932AV
WASHER
P10951 BOW
ROLLER
HOUSING
P55704
HEX NUT ST070932AV
WASHER
FIGURE 2. ASSEMBLING ROLLER INTO HOUSING
FIGURE 3. COMPLETELY ASSEMBED BOW ROLLER
- Insert P55712 Bow Roller Spacer into P55710 as
shown in Figure 1.
- Insert bow roller and spacer into P10951 Bow Roller
Housing along with P55715 Bow Roller Loop as shown
in Figure 2. Make sure that the loop fi ts inside the bow
roller housing, not outside. Secure with P55703 Roller
Bolt, STO70932AV Washers (one per side) and P55704
Hex Nut. The completely assembled bow roller is shown
in Figure 3.