American Dynamics AD2089 - Manual (Page 19)

Connection and Setup of the AD2089
11
• From left to right, the first digit represents the pan speed. Speed is directly proportional to the
distance from the joystick’s center position. “1” represents the slowest pan speed, and is
therefore the position closest to the center. “8” represents the fastest pan speed, and is therefore
the position furthest from the center.
• The second digit (left to right) represents the panning direction (left or right, "L" or "r").
• The third digit (left to right) shows the tilt speed (up or down, "U" or "d"). Speed is directly
proportional to the distance from the joystick’s center position. “1” represents the slowest tilt
speed, and is therefore the position closest to the center. “8” represents the fastest tilt speed,
and is therefore the position furthest from the center.
• The fourth digit (left to right) shows the tilt direction (up or down, “U” or “d”)
When the joystick is moved left or right, or forwards or backwards, the numbers on the CAMERA
display change. Moving the joystick to the left or forwards increases the numeric values. Moving to
the right or backwards decreases the numeric values. Zero is the lower limit for numeric values.
“255” is the upper limit.
When the joystick is twisted clockwise or counter-clockwise, the numbers on the MONITOR/DVMS
display change. Twisting clockwise performs the zoom-in or telephoto function. When twisting
clockwise, an “I” (for zoom in) should appear before the digits, and the digits will increase. Twisting
counter-clockwise performs the zoom-out or wide function. When twisting counter-clockwise, a
“O”(for zoom out) should appear before the digits, and the digits will decrease. Zero is the lower
limit for numeric values. “255” is the upper limit.
Key Functionality Test
This test performs a visual and audible check of keyboard key actions. When the test is started,
each of the keyboard LED display sections shows a number representing the number of keys in
that section of the keyboard. The numbers displayed are as follows:
CAMERA display: 1 2 8 1 2 8
Monitor/Playback display:
Clockwise Motion
l 2 0 2
Monitor/Playback display:
Counter- Clockwise Motion
O 1 0 2
pan speed (1-8)
pan direction (left or right)
tilt speed (1-8)
tilt direction (up or dow n)
Enter Display
(Joystick in Motion)
8 L 1 d
Display
Selection
Number of Keys
SITE 4
MONITOR/DVMS 5
CAMERA 9
ENTER 23