Alliance Laundry Systems HX - Manual (Page 32)

30 9001900
Section 3 Troubleshooting
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. DOOR LOCK SWITCH ANALYSIS: DISPLAY READS “PLEASE CLOSE DOOR”
YES
1
The display reads “Please Close Door”.
Is
the door
closed?
2
Close the door.
NO
Check
the orange/white and
white/brown wires from the door
terminal on the main board,
through the molex plug (75-165
models only) and from the molex
plug to the door lock top door
switch. Is the wiring intact and
properly connected?
Repair/replace the wiring as
needed.
YES
NO
Check the top switch with a
continuity test to see if it opens
and closes properly. Replace
the switch if it does not open
and close properly.
CFD1995S