Ridetech 12226799 User Manual
Page 3
ABAR11005 F350 AirBar HD rear air ride system
1. Raise and support truck at a comfortable working height. You will need to support the truck by the
frame ahead of the leafspring mounts. You will also need to support the axle housing with three
jackstands, two under the axle tubes inboard of the leafspring pads and one under the pinion yoke to
keep the axle housing from falling when the leafsprings are removed.
2. Remove the leafsprings.
.
3. Remove the leafspring overload
bracket and install the upper AirBar
frame bracket into it’s place. There will
be extra holes to drill. The bottom bar is
installed into the oem leafspring hangar.
4. Repeat this procedure for the
passenger side
5. Install the AirBar bridge mount
assembly. You will probably need
help for this as the bridge is large
and heavy
.
Tighten the bolts evenly.
This is an overall view of the
F350 AirBar HD assembly