Ridetech 11446799 - Manual (Page 4)

7. Install upper airspring brackets onto the framerail using the existing Belltech C notch attachment
bolt locations. [NOTE: If you are using a C notch other than a Belltech unit, you may need to modify
the upper airspring bracket for proper placement. What we are trying to accomplish is to have the
upper airspring bracket directly above the lower mount at a vertical distance of approx. 10.5” at
highway ride height. This places the top of the airspring level with the bottom of the framerail]
Note that the panhard bar frame bracket is attached to the passenger side framerail using the
airspring bracket fasteners.
Drivers side upper airspring mount. This
mount is used in conjunction with the
Belltech C notch.
Passenger side inner framerail showing
panhard bar frame bracket installation.
Also note the notch in the airspring
bracket to fit around the Belltech C
notch.
5. Remove the oem leafspring
overload bracket and Install the
upper 4 link bar frame bracket into
its place. You will be able to
locate the bracket using some of
the oem hole and use the bracket
as a template to drill the
remainder of the attachment
holes.
6. Install the 4 link bars into their
respective locations. Note that the
oem leafspring bolt is used to
secure the lower 4 link bar to the
oem leafspring hangar.