AMX DTMF+ Interface AXB-DTMF+ - Manual (Page 15)

Programming
11 AXB-DTMF+ DTMF+ Interface
Timing System Send_Commands (Cont.)
Command Description
LOSSLCMIN-XXX The minimum time a loop current is off (used to detect other end hung up).
• Time increment = 10 ms
• Default at reset = 10
Example:
SEND_COMMAND DTMF, 'LOSSLCMIN-15'
Sets a .15 second (150 ms) minimum off time for a loop current.
OBUOFFMAX-XXX Outgoing busy off time maximum.
• Time increment = 10 ms
• Default at reset = 60
Example:
SEND_COMMAND DTMF, 'OBUOFFMAX-65'
Sets the outgoing busy off time maximum to .65 second (650 ms).
For the code to work properly, ring, busy, and reorder time values must be set
so that ring is greater than busy, and busy greater than reorder
(ring>busy>reorder).
OBUOFFMIN-XXX Outgoing busy off time minimum.
• Time increment = 10 ms
• Default at reset = 40
Example:
SEND_COMMAND DTMF, 'OBUOFFMIN-45'
Sets the outgoing busy off time minimum to .45 second (450 ms) (see NOTE
for Send_Command 'OBUOFFMAX-XXX ').
For the code to work properly, ring, busy, and reorder time values must be set
so that ring is greater than busy, and busy greater than reorder
(ring>busy>reorder).
OBUONMAX-XXX Outgoing busy on time maximum.
• Time increment = 10 ms
• Default at reset = 60
Example:
SEND_COMMAND DTMF, 'OBUONMAX-65'
Sets the outgoing busy on time maximum to .65 second (650 ms) (see NOTE
for Send_Command 'OBUOFFMAX-XXX ').
For the code to work properly, ring, busy, and reorder time values must be set
so that ring is greater than busy, and busy greater than reorder
(ring>busy>reorder).
OBUONMIN-XXX Outgoing busy on time minimum.
• Time increment = 10 ms
• Default at reset = 40
Example:
SEND_COMMAND DTMF, 'OBUONMIN-50'
Sets the outgoing busy on time minimum to .5 second (500 ms) (see NOTE for
Send_Command 'OBUOFFMAX-XXX ').
For the code to work properly, ring, busy, and reorder time values must be set
so that ring is greater than busy, and busy greater than reorder
(ring>busy>reorder).