Ridetech 13044099 - Manual (Page 3)

8. Hold the air spring assembly up to
the coil spring pocket. Using a camp
to hold the bracket in place; center
punch and drill the two mounting
holes.
9. Secure the assembly with two 3/8”
x 1” bolts, Nylok nuts and flat
washers.
Note: The air line must be routed at
this time.
14. Double-check air spring
clearance through full suspension
travel. Allowing the air spring to
rub will cause air spring failure
and is not a warrantable situation.
15. Ride height on this air spring is
5” tall. This will be achieved at
around 100psi but will vary to driver
preference & vehicle weight.