Ridetech 13084099 - Manual (Page 2)

13084099 Installation Instructions
1. Raise and support the vehicle by the frame to the safe and comfortable working height.
2. Remove the coil spring and shock absorber. Refer to the factory service manual for proper
disassembly procedures.
****RideTech Shocks Required****
4. The top of the lower coil spring
retainer must be cut off to accept the
lower air spring mount. A die
grinder with a cut off wheel works
well. Grind edges smooth.
5. Place the lower air spring roll
plate over the retainer.
3. Remove the bump stop from the
frame and cut the upper convolution
off, then reinstall back onto the
frame. This will allow for maximum
drop.
Note: The bump stops must be
reinstalled to prevent damage to the
air spring.