Ridetech 11284099 - Manual (Page 3)

IT IS THE FINAL RESPONSIBILITY OF THE CUSTOMER TO ENSURE THAT THE AIRSPRING
DOES NOT RUB ON ANYTHING AT ANYTIME!!
4. Place air spring assembly into the coil
spring pocket with the stud protruding
through the upper washer. The airline
must be routed at this time. Secure with
7/16” nut and flat washer.
5. Slide the lower plate between the air
spring and the lower arm. It is held tight
with a 3/8” x 3/4" bolt with flat washer
and lock washer.
6. This air spring should be
approximately 5” tall at ride height.