Ridetech 11289100 User Manual
Page 3
Advertising
9. The other end of the PosiLink
will attach to the tab on the
StrongArm using a 12mm flat
washer and locking nut.
10. Check sway bar clearance
through full suspension travel.
11. Congradulations!! Your New
MuscleBar installation is now
complete. If you have any further
questions feel free to contact us at
812-482-2932.
7. Install the lower StrongArms.
8. Screw one end of the PosiLink
into the end of the sway bar. A
12mm lock washer will be used
between the stud and the sway bar.
PDF created with pdfFactory trial version
Advertising