Ridetech 11169100 User Manual
Page 2
Advertising
11169100 Installation Instructions
1. This sway bar is designed for use with our lower StrongArms. Installation on other arms
may require modification.
2. Remove the end links from the factory sway bar. Then remove the bolts attaching the sway
bar to the frame.
3. On some cars, the compression stop bracket that is welded to the frame will need to be removed
to allow clearance for the sway bar arm.
3. On some cars, the compression
stop bracket that is welded to the
frame will need to be removed to
allow clearance for the sway bar arm.
Advertising