Ridetech 42152000 - Manual (Page 22)

INSTALLATION OF TIGER CLAMPS AND
MUSTANG DOOR BAR BENT BRACKET
•
Install Tiger Cage Clamp around the Main Hoop.
•
Insert the Mustang Bent Bracket into the front of the Tiger Clamp. (see fig 9)
•
Install two 3/8”-16 x 1” (#2) long allen head bolts into the front Tiger Clamp holes.
•
Install two 3/8”-16 x 1” (#2) long allen head bolts into the rear of the Tiger Clamp.
•
Install two ½”-20 x 1 ½” (#4) long 12 point bolts into the door bar.
•
Install two ½” -20 (#5) hex nuts and tighten.
Fig (9)
MUSTANG BENT BRKT
22 PAGE