Ridetech 42152000 - Manual (Page 7)

•
Removal of the seat fasteners is recommended to allow you more access
to install the Tiger Cage Road Race bars.
•
There are 2 bolts in the front of the seat, and two nuts in the rear of the
seat that hold the seat to the floor pan (see fig 1).
•
Another good idea that we do here at Ridetech is masking off the door
jamb area to keep it from being scratched during the installation of the
door bars.
PARTS TO REMOVE BEFORE INSTALLATION
Fig (1)
FACTORY BOLTS
FACTORY NUTS
7 PAGE