Rocky Mountain Radar RMR-C430 - Manual (Page 3)

Installation:
1) Complete, sign, and mail Ticket Rebate
Registration card.
2) Attach the windshield bracket to the RMR-C430
detector. Align the edge on the bracket with the slot
opening on the front of the case. Slide the bracket
gently into the case until it locks into place.
3) Place the windshield bracket in the upper center
portion of the windshield. The ideal position will be
just below the rear view mirror. Then press firmly to
seat suction cups. Note: Tinted glass may degrade
the laser performance.
4) Bend the windshield bracket mount to a level
position.
5) The RMR-C430 will hang from the bottom of the
bracket and must have an unobstructed view of the
road ahead.
6) Insert the small end of the power cord gently into
the power jack on the right side of the unit and the
large end into the cigarette lighter receptacle.
Remote mounting is not recommended.
Hard wire: Remove cigarette lighter plug. Connect
the black with white stripe wire to +12 Volts, and
then connect the solid black wire to ground.
3