Rocky Mountain Radar RMR-C430 - Manual (Page 6)

Interchangeable Color Bezel Panels:
The RMR-C430 model has optional removable color
panels. To remove the panel use a small screwdriver,
insert under front of panel (see diagram) and pry
upward gently. To replace, insert rear of panel tabs
in slots on unit and press down. Panel should click
and fit firmly in place if properly installed.
Colored panels have no effect on the performance of
your unit. (Fig A)
Selectable VG-2:
To activate VG-2 detection turn the unit on. After
the self-test has completed, press and hold the City
button down for 3~5 seconds until the unit beeps
three times. VG-2 detection is now activated. To
deactivate press and hold the City button for 3~5
seconds until the unit buzzes once. VG-2 is now off.
Selectable Tones: The RMR-C430 has selectable
tones. Press and hold the Mute button for 3~5
seconds to change the tone.
Auto Memory: The RMR-C430 has an automatic
memory. Any settings enabled when the unit is
turned off will still be enabled when the unit is turned
back on.
Fig. A
R R-C430 T 3 2 K X 1 C P
Fig. B
6