10 volume down button, Radar and head set connection, Head set auto power off – Rocky Mountain Radar Мото-Raptor User Manual

Page 10: Radar & laser signal strength, Auto mute operation

Advertising
background image

10

VOLUME DOWN BUTTON

Press Volume down button to decrease it from level 5 to level 1.
Volume levels 1 and 5 give one long beep and levels 2-3-4 give one
short beep. Factory default is level 3.



RADAR AND HEAD SET CONNECTION


The Head Set and Radar Detector will automatically connect as soon
as both the Head Set and the Radar Detector are powered on. The
Head Set will give one beep when it is connected with radar. If the
Head Set does not receive any data from the Radar Detector for 5
seconds, the Head Set will give a 2 beep alerts every 10 seconds as a
disconnection alert.


HEAD SET AUTO POWER OFF

The Head Set will auto power off after 60 minutes of inactivity. The
Head Set will give auto power off warning alarm if disconnection
continues for more than 60 minutes. Head Set will give one beep per
second for 10 seconds with LED blinking. Press any button to cancel
auto power off during 10 seconds warning.


RADAR & LASER SIGNAL STRENGTH


There are 3 levels of signal strength alarms for K and Ka bands. Laser
alert level is not related to signal strength. Laser alert remains at the
same alert level.

AUTO MUTE OPERATION


The Head Set will beep 4 times to alert for K, Ka and laser detection
Every two minutes if the signal is still present the unit will beep 4 times
then goes back to mute status until signals are out of range or a new
signal is detected.

Advertising