Rocky Mountain Radar Мото-Raptor - Manual (Page 8)

8
WIRELESS HEAD SET
Before installing the Head Set make sure you leave enough space to be
able to position the LED in view.
Mount the Head Set on the helmet using the dual lock tape. Thoroughly
clean any surface before the tape is applied.
Position the LED
display in such a way that it doesn’t interfere with your
view of the road, but is still visible.
Mount speaker inside of the helmet using provided dual lock tape.
Make sure to tuck in extra speaker wire so it will not interfere with
turning of the head.
Position the speaker and power connector face down to prevent them
from damage from the elements.
RADAR DETECTOR FUNCTIONS:
- K and Ka band detection
- Laser signal detection
- LED Display
- Auto Mute
- Volume Level memory
- Head Set Low Battery Alarm
- Auto Power Off after 1 hour of inactivity
- Head Set Battery Charge Mode
- Head Set Three Buttons [
(+ ) Volume Up
–
(0) Power
–
(-) Volume
Down]