Avid Technology Pro Tools HD 7.2 - Manual (Page 120)

What’s New in Pro Tools HD 7.2 114
Two-Knob Surround Panning
With D-Control and D-Command, when work-
ing with surround panning, you can link front
and rear pan controls to facilitate left-right mo-
tion in the surround field.
To link front and rear surround panners on ICON:
1 Press the Operation switch in Console Prefs
section until “2KbPan” appears in the Soft Keys.
2 Press the Soft Key that corresponds to
“2KbPan” to toggle the preference on or off.
Latching Global Controls
The operation of the following Global controls
on D-Control and D-Command have changed:
• Do To All
• Do To Selected
• Set to Default
These switches no longer latch as active when
single-pressed, and instead clear after a single
operation is completed.
To latch the Do To All, Do To Selected or Set To
Default switch to perform multiple operations:
1 Double-press the corresponding switch. The
switch flashes to indicate it is active.
2 Perform any operation you want to be affected
by the active switch.
3 Press the flashing switch to exit.
Nudging Track Position with the
Scrub/Shuttle Wheel
You can nudge the display of tracks on D-Con-
trol or D-Command channels forward or back-
ward with the Scrub/Shuttle wheel.
To nudge the position of tracks in Normal mode:
■ Hold any of the Nudge/Bank switches and
turn the Scrub/Shuttle wheel.
To nudge the position of tracks in Custom Faders:
■ Hold the Bank/Cycle switch in the Custom
Faders section and turn the Scrub/Shuttle wheel.
To nudge the track in the focus channel:
1 Hold Control (Windows) or Command (Mac)
and press the left or right Nudge 1 switch.
2 While holding the Nudge1 switch, turn the
Scrub/Shuttle wheel.
Moving Windows On-Screen with
the Scrub/Shuttle Wheel
You can move any of the Pro Tools windows on-
screen with the D-Control or D-Command
Scrub/Shuttle wheel.
To move a Pro Tools window horizontally on-
screen:
In the Window Management section, hold the
switch for the window and turn the Scrub/Shut-
tle wheel.
To move a Pro Tools window vertically on-screen:
In the Window Management section, hold the
switch for the window, hold Shift, and turn the
Scrub/Shuttle wheel.
Making Edit Selections with the
Scrub/Shuttle Wheel
You can create or extend Edit selections on D-
Control or D-Command with the Scrub/Shuttle
wheel and the Mark In/Mark Out switches.