Avid Technology Pro Tools HD 7.2 - Manual (Page 48)

What’s New in Pro Tools HD 7.2 42
To move or nudge a fade or cross-fade within its
contributing regions:
3 Select the fade or crossfade by doing one of
the following:
• Use the Time Grabber tool to select the
fade.
• Use the Selector tool to select a range that
includes the fade.
4 Move the fade by doing one of the following:
• Drag the fade with the Time Grabber tool
to a new location on the track.
• Nudge the fade by pressing Plus (+) or Mi-
nus (–) on the numeric keypad to move the
fade forward or backward on the track.
Moving and Nudging Regions with
Fades
Nudging Regions Adjacent to Fade-Ins
or Fade Outs
When you nudge a region selection adjacent to
a fade in or fade out, but do not select the fade,
the adjacent fade stretches to maintain the fade
start or end point. The amount of stretch de-
pends on the amount of audio material outside
the fade start or end point.
To a nudge region without its fade:
1 Select a region by doing the following:
• Make sure Tab to Transients is off.
• Using the Selector tool, press the Tab key to
locate the start of the region.
• Hold Shift and press Tab to select to the end
of the region.
2 Nudge the region by pressing Plus (+) or Mi-
nus (–) on the numeric keypad.
Selecting a fade with the Time Grabber
Dragging the fade with the Time Grabber
Result of moved fade
Selecting a region without its fade
Nudging a region without its fade